1.800.208.1755

Product Description

WP206U - Electric Water Pump

American made with quality far superior to any other performance aftermarket company, we build our water pumps with pride right here in the USA.  Don't be mislead by inflated flow numbers and competitors' outlandish claims.  We say what we mean and mean what we say.  Our 2 year, unlimited mileage guarantee and full satisfaction money back guarantee should convince you that buying Meziere is buying value!
Reservoir pumps - Fill it and forget it!
Our new reservoir pump is the most innovative solution for those difficult-to-fill systems. It was specifically designed for dragsters where the radiator is laying down flat; either in the front of the driver or over the transmission. It has also proven to be a great help in some kit car applications and other situations where the radiator is inaccessible. Its integrated surge tank makes these systems easy to fill in just a fraction of the time. This pump provides a cure for the problems associated with low and horizontal mounted radiators. The built in expansion tank serves as a fill point and air separator. With the pressure cap located at the correct spot in the system, the system fills easily with the pump running and maintains the level by purging accumulated air before any water escapes. With a head of water above a self priming pump cavity, this design eliminates air locking and cavitation.

This water pump model features:

• Fits big block Mopar
• Reservoir design eliminates cavitation and air locking
• Suitable for street or drag strip use – 2500+ hour life expectancy
• Show quality polished finish
• Standard motor provides 35 gallons per minute free flow rating
• All stainless steel hardware included
• Stainless steel large diameter main shaft with high performance ceramic seal
• Pump will clear cam belt drives and most blower drives
• 1" NPT inlet adapters are available for #12AN, #16AN, #20AN, 1¼", 1½" or 1¾" slip hose
• #12AN female outlet - machined to accept o-ring boss type fitting

Technical Specifications:

• Belt Drives: Standard BBM design will clear Jessel belt drives and comparable belt drive systems.
• Distributer Belt Drives: This pump will not clear belt drive distributor systems.
• Finishing The System: This pump is supplied complete with gaskets and hardware but without the inlet and outlet fittings. The fittings need to be ordered according to the size of the desired hose connections.
• Amperage draw: Under normal use the pump will draw 6-7 amps.
• Overall Height Dimension: The standard pump is 6.80" long from the mounting surface to the tip of the pump.
• Pump Weight: This application weighs 9.5 lbs.
• 16 volt systems: When purchasing a pump for a 16 volt system we recommend the 16 volt optional motor on our pump. The 12 volt pump will work for limited use applications.
  

Additional Notes:
The standard 35 GPM pump is suitable for normally aspirated engines up to 650HP. Supercharged, turbocharged and high compression, high horsepower applications should use the 55GPM High Flow pump only. This model does not accept heater or bypass hoses as a standard. These may be added at the factory for an additional cost. Please call for details.

Accessories for Big Mopar:
Water Pump Spacers:
Thickness .9" WPS106
Relay Wiring Kit upgrade WIK346