This water pump model features:
- Fits big block Ford 429/460 style engines
- Reservoir design eliminates cavitation and air locking
- Suitable for street or drag strip use – 2400+ hour life expectancy
- Show quality finish
- Heavy duty motor provides 42 gallons per minute free flow rating
- Heavy duty motor provides 3000+ hour life expectancy
- All stainless steel hardware included
- Light weight. Complete standard big block Ford unit weighs only 9.2 pounds!
- Stainless steel large diameter main shaft with high performance ceramic seal
- Pump will clear cam belt drives and most blower drives
- 1" NPT inlet adapters are available for #12AN, #16AN, #20AN, 1¼", 1½" or 1¾" slip hose
- Belt Drives: Standard BBF design will clear Jesel belt drives and comparable belt drive systems.
- Distributer Belt Drives: Spacers will be necessary to clear belt drive distributor systems.
- Finishing The System: This pump is supplied complete with gaskets and hardware but without the inlet fitting. The fitting needs to be ordered according to the size of the lower radiator hose.
- Finishing The System: A back plate may be necessary if this pump is being mounted to a stock timing cover. See Accessory WP109.
- Amperage draw: Under normal use the pump will draw 6-7 amps.
- Overall Height Dimension: The standard pump is 6.1" long from the mounting surface to the tip of the pump.
- Heavy duty option adds .5" in length
- Pump Weight: This application weighs 9.2 lbs.
- 16 volt systems: The 12 volt pump will work for limited use applications. The pump should not be powered while charging your 16 volt system.
Additional Notes: The standard 35 GPM pump is suitable for normally aspirated engines up to 650HP. In drag-only, towed applications it is appropriate to 1800 HP. Supercharged, Turbocharged and high compression, high horsepower applications should use the 55GPM High Flow pump.