This kit comes with the components necessary to set up your traditional Chevy engine so that you can build oil pressure before cranking it over. The pump is designed to take oil from the pan and pressurize the oil passages with up to 30 PSI. Usually it is not possible to build pressure without cranking the engine with the starter. By using this, you can be assured the rotating parts and high wear valvetrain parts will benefit greatly from the additional lubrication.
Parts in the kit:
- WP723 Oil Pump with -06AN Connections and an Inlet Filter
- 3 feet of -06 AN black hose
- 06AN Hose ends; 2 straight, 1 90 degree and 1 150 degree sweep
- 1/4" NPT to -06AN adapter fitting
- Wire harness with 20 amp fuse
- One side mount plate, .13 thick
- One pump mount clamp 2.51"
- Mount hardware for the plate
- One aluminum and one steel weld fitting -06AN for pan connection